high-chromium cast iron is not commercially viable; a heat treatment is beneficial to the change of the microstructure. A mixture of martensite and residual 

The paper presents the results of research on the high-chromium cast irons of chemical composition (in wt. %) 2-4 C, 21-22 Cr, 1-2 Mo, 5-6 Ni, 

2021. 7. 15. · High chromium white cast irons are ferrous alloys with chromium contents of 11 to 30 wt% and 1.8 to 3.6 wt% carbon . Elements such as Molybdenum, Nickel Fig. 1a and Fig. 1b

2022. 2. 17. · The present work studied the effects of different modification treatments on the microstructure and mechanical properties of hypereutectic high chromium cast iron containing about 35 wt% chromium and 4.0 wt% carbon. It was found that the primary carbides in the hypereutectic high chromium cast iron were all refined to different levels after different

2022. 2. 10. · To improve the wear resistance of the low carbon steel (LCS), high chromium cast iron (HCCI) was embedded into LCS by the hot rolling technique. The macrostructure,

High chromium white iron is specially qualified for abrasion resistant applications. The predominant carbides in its structure provide it with a high hardness 

High-chromium white cast irons are ferrous alloys with Cr contents between 12 and 30% and 1.8–3.6% C. The as-cast microstructure is typically composed by a M7C3 

The present paper investigates the microstructural and erosive wear characteristics of a hypereutectic high-chromium cast iron, considering the erosion resistance, resulting from the impact of micro-sized particles, of both as-received and heat-treated conditions. Quezada, J.G.; Maldonado, C. Effect of titanium on the as-cast microstructure

In the as-cast condition, the microstructure of high chromium molybdenum white iron consists essentially of dendrites of austenite in a matrix of eutectic mixture of austenite and (Fe, Cr)7C3carbides [ , ]. For many applications, castings are heat treated prior to service to increase the wear resistance as well as impact toughness.

Microstructure and Sliding Wear Behavior of High Chromium Cast Iron Strengthened Low Carbon Steel Composite Abstract. To improve the wear resistance of the low carbon steel (LCS), high chromium cast iron (HCCI) was embedded into Introduction. Low carbon steel (LCS) is a widely applied material in

In this work, a canning compression process was developed to perform hot compression deformation of high chromium cast iron (HCCI) on a Gleeble 3800 thermomechanical simulator at temperature of 950-1150 °C and strain rate of 0.01 s -1. The hot deformation behavior and microstructure evolution of HCCI were investigated.