gTeek - the Tech Geek! Over 20.000 products for industrial supply.

Features of V-RING Seals. 1. Single function sealing element: 2. Seals against dust, dirt, lubricant, oil or water spray: 3. Works well in combination with rotary shaft seals

V-ring type S with bevel back serves as a pressureless, axial rod seal which is clamped on a shaft. The flexible sealing lip seals a counterface at a right 

BMG plays a pivotal role in supporting the productivity and production targets of all Industrial, Manufacturing, Mining and Agricultural sectors of the economies in the countries it serves.

The V'Rings offer optimal, pressure-free axial sealing on all types of rotating shafts. The V'Rings can be used for static applications in certain applications and can also be used to protect a

the V-ring may be fitted by using a blunt instrument, such as a screw driver, to manipulate the seal into the correct position. General rules: 1.The V-ring, the counterface and the shaft should be clean. 2.The shaft should preferably be dry and free from grease or oil, particularly when the V-ring is mounted without axial support. 3.The lip of

Part Number Seal Type Shaft Size Maximum Shaft Size Minimum Overall Width Material 800034 VRS1 0.14 in3.556 mm 0.11 in2.794 mm 0.12 in3.048 mm Fluoro 800040 VRS1 0.18 in4.572 mm 0.14 in3.556 mm 0.15 in3.81 mm Nitrile 800044 VRS1 0.18 in4.572 mm 0.14 in3.556 mm 0.15 in3.81 mm Fluoro

V-rings are axial seals for shafts and bearings. V-rings seal axially against a counter face. The V-ring is reliable and effective against for instance dust, dirt and splashing water or oil. NewDealSeals supplies various types of V-Rings, thus providing alternatives for brand names such as Frontseal®. Suitable for

V-RING SEALS. V-ring seals are mounted on shafts and their thin, tapered lip seals against a surface (counterface) at right angles to the shaft. No special demands are placed on the surface finish of the shaft seating and the V-rings act as flingers, since they have an interference fit on the shaft and rotate with it. Misalignment of the shaft

The V-ring can be used alone to protect a wide assortment of bearing types from contaminants while reliably retaining the lubricant. They are also often used as secondary seals to protect primary seals in highly contaminated environments. VR4 design V-rings have a large seal cross section and permit larger misalignments. In applications

V-ring type A V-ring type A with bevel back serves as a pressure less, axial rod seal with a very short mounting length, which is clamped on a shaft. The flexible sealing lip seals a counterface at a right angle to the shaft preventing dirt, dust and splash to enter the construction. Materiaal Seal : NBR FPM Colour : zwart brown