Bushings are a small cylindrical component of your skateboard located just below the kingpin. They help your skateboard to move around freely. Bushings that come with your skateboard are usually soft. There’re 2 types of bushings: Hard Bushing Hard bushings need more force to move around easily. They’re stiff and are good for doing tricks.

Bushings are the colorful, rubber-like cylinders located in the center of your trucks. Typically bushings are made out of urethane and the vast majority of 

This is the most popular combination, according to many skateboarders, specifically Bones double-cone bushings. Bones Hardcore bushings are available in soft,

Typically bushings are made out of urethane and most set-ups use two bushings per truck that are connected using a kingpin. The bushings allow you to turn and pivot your skateboard. Bushings typically aren't something that someone thinks about and are typically sold with the skateboard trucks themselves.

Skateboard truck bushings are measured by durometer, or hardness. Most companies use the Durometer A scale, which ranges from 1-100 (the higher the number, 

Lacroix uses custom bushings (made by Riptide) for their Hypertrucks and some MBS trucks use shock blocks. Trucks without Bushings Some trucks don’t use bushings at all. Instead, they

These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks; Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks If you want to purchase products like the top skateboard trucks, you need to follow a buying guide. Some features need to tick your boxes before

The harder your bushing, the harder your truck will be to lean and turn. A hard urethane offers a lot more resistance as you crank the truck over, and this gives more stability for going fast. The softer your bushing, the more reactive and turny your truck will be, and the less resistance the bushing has as you crank it over.

Bushings Bushings are made of polyurethane and are attached to your kingpin and are held in place by the bushing seat. They allow you to pivot your board when you lean to make turns.

Bushings The bushings on a skateboard truck enable it to rotate, as well as spin, via the kingpin and hanger. Most of them are made of polyurethane or plastic, although some brands also use Teflon bushings. A polyurethane bushing provides a smoother ride for cruising, whereas a plastic bushing provides better stability in downhill riding.

Generally speaking, go with an axle that is just greater or less than 1/4" the width of the board. Here is a little chart that compares the trucks suitable for each deck size: 6"-7.25" truck axle - 6.5" to 7.25" skateboard decks. 7.5" truck axle - 7.25 to 7.5" skateboard decks. 7.75" truck axle - 7.5" to 8" skateboard decks.