EN AW-6082 - EN AW-Al Si1MgMn According to: "mill products general properties" Pechiney Thermal conductivity (0 to 100°C)- W/m °C (T6 temper)

The EN 573 Flat Bar is used for its good strength and high temperature resistance properties. The minimum tensile strength of the material is 340MPa and the minimum yield strength is 290MPa. The 6082 T6 Square Bar as well as the round bar types also have high melting points. The melting point of this alloy is at 555 degrees Celsius.

178 mm. There is no standard for cast round rods (cast billets/bolts) that defines mechanical properties. A. Brinell hardness in the 

2020. 11. 23. · EXTRUSION ALUMINIUM ALLOY EN AW – 6082 All PMI products in aluminum alloy type EN AW 6082 are compliance with the spec in below table, which is referred to EN755-2: standard for mechanical properties and EN573-3: for chemical composition. We in state T6: 1.58 W/cm°K Linear thermal expansion coefficient:

The paper deals with an investigation of mechanical properties of T-joints of EN-AW 6082-T6 produced by FSW technique. Different ways of base metal preparation prior to welding (T-joints welded as two-pieces and as three-pieces), as well as two various shapes of steel dies directly forming the shape of tee connections, were used in experiments.

Chemical Element · Manganese (Mn), 0.40 – 1.00. Iron (Fe), 0.0 – 0.50 ; Physical Property · Density, 2.70 g/cm³. Melting Point, 555 °C ; Mechanical 

Aluminum 6082-T6 Available Properties Density, AA; Typical Hardness, Vickers Tensile Strength, Ultimate, wall thickness < 5 mm Tensile Strength, Ultimate, wall thickness > 5 mm Tensile Strength, Yield, wall thickness < 5 mm Tensile Strength, Yield, wall thickness > 5 mm Elongation at Break Thermal Conductivity Aluminum, Al, As remainder

2021. 1. 8. · Physical Properties EN AW 6026 conforming to ELV and RoHS Density (g/cm3) 2.73 Modulus of elasticity (MPa) 69640 Thermal conductivity (W/m K) 172 Coefficient of thermal expansion (25-100° ) 10-6/K 23.4 Electrical conductivity at 20°C (MS/m) 26 (45% IASC) Impol Group, Slovenia, +386 845 3 100, www. impol.com, [email protected] alu ECO

We offer a wide range of products in aluminium, stainless steel, copper, brass and bronze.

6082 - T6~T651 Plate Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining.

Yield strength – Rp0,2. Ductility A50. 280 MPa. 130 MPa. 30 %. Table 1. EN AW 6082 T6 – BM chemical composition and mechanical properties. Table 2.