Anti-seize products are applied to bolts, fasteners, flanges and other clamped interfaces to prevent galling, seizing and corrosion, as well as lubricating to 

03/02/  · In fact, using anti-seize in this application could induce corrosion much more rapidly than using a waterproof grease. The issue is of course most important in salt water,

03/10/  · Anti-seize products are applied to bolts, fasteners, flanges and other clamped interfaces to prevent galling, seizing and corrosion, as well as lubricating to ease disassembly. Anti-seizes can be pastes, greases and coatings, and they can be based on a wide range of materials (e.g. copper, nickel) to suit particular systems.

Locktite goes on fasterners you can't afford to come loose, anti-seize goes on fasterners you want to be able to take apart without having to see a physical therapist the day after. M, Merkava_4,

Because aluminum galls in steel or iron, it is always a good idea to coat the fasteners with a bit of anti-seize. A note of caution - NEVER use anti-seize on wheel lugs. NEVER EVER. Anti-seize is great for protecting aluminum and stainless steel from galling in iron or steel threads. Just don't use it on wheel studs. EVER. Assembly Grease,

23/01/2022 · As the carrier grease burns off at high temps, you’re left with degraded grease and metal chips. Anti-seize causes more corrosion, not less, Anti-seize enables galvanic action, Any time you have two different types of metal in close proximity, you get galvanic action.

Copper grease is an anti seize compound designed to operate at extremes of temperature. Note, it is not a lubricant. It is often used to 

Not a good idea. Copper based anti-seize grease used on steel or iron is probably a good idea, but I would not use it on anything with Aluminum. In basic Chemistry the teacher told a story about someone who used brass pipe fittings on the cooling connections on a very expensive Aluminum mold.

21/07/  · Grease is for bearings and antisieze is for fasteners. Oiling or greasing bolts is an old concept that comes from the automotive world where they give "dry" and "oiled" torques on

Copper grease is an anti seize compound, so whilst technically it isn't a lubricant, it's often used for these purposes. Using Copper Grease is a sure way to seize up the slider pins - When I first started doing this type of thing many years ago, many people were using copper grease for their entire brakes.

High heat oils grease will fair better. Everything else you mentioned is fine. Just remember, if its easy to put together or take apart because you oiled it, it's also easy for it to loosen its self on its own.