V-ring type A with bevel back serves as a pressure less, axial rod seal with a very short mounting length, which is clamped 

the V-ring may be fitted by using a blunt instrument, such as a screw driver, to manipulate the seal into the correct position. General rules: 1.The V-ring, the counterface and the shaft should be clean. 2.The shaft should preferably be dry and free from grease or oil, particularly when the V-ring is mounted without axial support. 3.The lip of

The V-RING seal is a unique all-rubber seal for rotary shafts. The V-Ring seal is the perfect seal to prevent the ingress of dirt, dust,water or 

Discard old seals and thoroughly clean the body and sleeve. 2. Install the new O-rings on the sleeve with the dust seal to the rear and the product (pressure) seal up front. 3. Lubricate the body and the sleeve with grease. 4. Insert the sleeve into the body, slowly rotating the sleeve while inserting it into the body.

V-Rings, Environmental Excluder – These seals are very commonly used to protect bearings on rollers in steel mills, paper mills, cement mills, machine tools, 

V-rings are very versatile for pressure-less application usage and are mostly used in rolling mills, farm machinery and electric motors. Daemar offers V-Rings in 4 profiles (VA, VS, VL and VE) and two materials; Buna ‘N’ and Viton. V-Rings constructed of NBR (temperature range: – 40 to + 100°C) and FKM (temperature range: – 20 to + 200

V-rings are versatile axial shaft seals with many different uses. V-rings are mounted to the shaft and can be used as a face seal, lip seal or more 

V ring seal for plummer block housing, with a cylindrical bore. For bearing with a 16mm diameter.V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. V-rings can accommodate circumferential speeds up to 7 m/s. For circumferential speeds between 7 and 12

rolling mill and papermaking machine applications. Additionally they can be used as secondary seals for heavy duty applications where the primary seal has to be 

Industrial seals Power transmission seals V-ring seals Image may differ from product. See the technical specification for details. 140 VL V V-ring seals, globally valid V-ring seals are axial shaft seals, available in a wide range of sizes and appropriate for many applications. Top TECHNICAL SPECIFICATION Technical specification

2018. 1. 8. · Type S V-rings with bevel back serves as a pressure-less, axial rod seal which is clamped on a shaft. The flexible sealing lip seals a counter face at a right angle to the shaft, preventing dirt, dust and splash to enter the construction. Available in sizes from .180″ (4.5mm) shaft to 8.270″ (210mm). Commonly used in agricultural and